Göbel - Frost protection heating cable 2 m with thermostat

€17.50

Incl. 19% Tax, excl. Shipping Cost

Frostsafe frost protection heating cable 2 m with thermostat, 230V, frost-free, 32 Watt

Delivery Time: 2-3 Tage

2 meter heating cable

32 Watt power

keeps your water pipe guaranteed frost-free
built-in thermostat works independently
tested VDE safety
do not install in the browsing area of animals - use only 24 volt heating cable here
not suitable for heating pipes
in case of additional insulation, do not insulate the thermostat as well
Protect the area that the animals can nibble on with a bite guard
IPX7
Made in EU
prevent freezing of water pipes
Thermostat in the heating cable switches the cable on automatically

What should be observed with 230 V heating cables:

Always attach the heating cable to the underside of the pipe.
the water pipe must be earthed
230 V heating cables must be plugged in and connected to a power supply with a circuit breaker (FI switch 30 mA).
The heating cables must not be shortened and should therefore already be ordered in the correct length.
Remaining lengths can be wound around the pipe in coils (note that a coil spacing of at least 15 mm must be maintained here).
Do not bend the heating cable and observe the max. bending radius of approx. 50 mm.
The heating cables can be fixed to the pipe with insulating tape or aluminium tape.
When used on plastic pipes, the pipe must be wrapped with aluminium tape before the heating cable is laid.
the pipe and the heating cable should be insulated with an insulation of at least 13 mm
The thermostat of the heating cable should be placed at the coldest position of the pipe.
the thermostat must be only moderately insulated
do not use 230 V heating cables in the browsing area of animals
the installation must be carried out by a qualified specialist in accordance with VDE0100.